默认分类

mtk 798x闭源驱动启用弱信号剔除,802.11r,无线有线回程ap漫游设置

Myfyfy · 5 阅读

无线线有线回程ap漫游设置

1.无线模式先设置好无线中继确定能连接上级 ap,有线回程则只需将网线插到
ap 的 lan 口。建议主路由开启强制 dhcp


2.将以下命令粘贴到启动项-本地脚本 exit0 前 。

将命令中的 192.168.8.3 替换为 ap 的管理 ip,192.168.8.1 替换为主路由 ip(主路由和 ap ip 需在同一网段)。保存后重启路由器完成设置 ap 模式
uci set network.lan.ipaddr="192.168.8.3"
uci set network.lan.gateway="192.168.8.1"
uci set network.lan.dns="192.168.8.1"
uci set network.lan.device="eth1 eth0 apcli0 apclix0 eth0.1 eth0.2"

uci set network.wan.device=
uci set network.wan6.device=
uci commit network
uci del dhcp.lan.ra
uci del dhcp.lan.dhcpv6
uci del dhcp.lan.ndp
uci set dhcp.lan.ignore="1"
uci commit dhcp
/etc/init.d/network restart
sleep 10
for i in firewall dnsmasq odhcpd; do

if /etc/init.d/"$i" enabled; then /etc/init.d/"$i" disable /etc/init.d/"$i" stop
fi

done



最后将主路由和ap的ssid、加密方式、密码设置为相同,测试无线中继回程漫游,切换效果还是很不错的。


https://www.right.com.cn/forum/thread-8314342-1-1.html

← 返回列表编辑这篇